If you have an iPhone 4, iPhone 3GS, or iPod Touch fourth generation and have installed the 6.1.3 version of iOS, you already have a procedure to jailbreak tethered with the tool Redsn0w 0.9.15 beta 3.
Before you put the guidance into practice, we recommend, as always, to read it all carefully and if in doubt, read it several times and only when you have clear ideas to proceed with the jailbreak. The staff of iSpazio is not responsible for any use that you do with this guide.
Just yesterday we had reported the publication of the new version of iOS, the 6.1.3 for all iOS devices currently available. The news is that you already have a procedure to perform tethered jailbreak on older devices such as iPhone 4, iPhone 3GS and iPod Touch fourth generation.
The word tethered means that every time the device will need to be connected to your computer, you can use it properly with a procedure that will explain later in this article. We see with the requirements for jailbreak and how to achieve it.
COMPATIBLE DEVICES
- iPhone 3GS
- iPhone 4
- iPod touch 4th generation
REQUIRED
- A computer with Windows XP or later, or Mac OS X 10.5 or later.
- One of the above mentioned devices with iOS 6.1.3
- A USB cable to connect the device to your computer
- The software Redsn0w 0.9.15 beta 3 for your computer >> Windows , Mac <<
- Version 6.0 of the firmware of your device >> iPhone 3GS , iPhone 4 , iPod Touch 4G <<
- iTunes, the latest version
WARNING: If you have a device that needs dell'unlock (via Ultrasn0w) to be used with telephone networks Italian (or your country), it is best not to update to iOS 6.1.3. Please note that currently you cannot use the tool with devices that have not been included in the list. Before making the guide I strongly recommend you make a backup of your device with iTunes, in the case that the procedure is successful.
PROCEDURE
1. Download Redsn0w 0.9.15b3 from the links above: this for Windows users, and this for Mac users
2. Download the file related to iOS 6.0 for your device from link: iPhone 3GS , iPhone 4 , iPod Touch 4G
3. Connect the device to your computer and double click on the ZIP file of Redsn0w. Extract the contents to your desktop (or in a folder of your choice) and run the application on the inside.
On Windows XP and 7 just run the file "As Administrator" (right click on the EXE file and select "Run as Administrator." On Windows 8 would be better to throw it in Compatibility Mode Windows XP: right click on the file, select Properties, go to the Compatibility tab and put a check mark on "Run this program in compatibility mode for." From the drop-down menu select Windows XP.
4. Application click on Extras
5. Click on Select IPSW. Find the folder where you downloaded the file in Step 2 and select it.
6. Return to the main page and click on Jailbreak Resn0w
7. Now you will have the opportunity to choose some options for the jailbreak. Sure that Cydia is selected and click the Next button. For users of the iPhone 3GS is also recommended that you enable Enable battery percentage.
8. Now you have to put your device in DFU Mode. To do that follow these steps:
a) Hold down the power button (Power) for at least 3 seconds
b) At the same time, hold down the Home button without leaving the ignition for at least 10 seconds
c) Release the power button, still holding down the Home button until Redsn0w does not recognize the device properly.
9. The device should now reboot. Remove your finger from the home button at this point.
10. Once the procedure is complete the program will inform you of success. Click OK and then click the Quit button to terminate the application.
11. During the process the device will reboot several times. Do not worry, everything is normal. Once finished Cydia will not be available, but that's because you need to boot using tethered mode, which we explain below.
START TETHERED
1. Rerun Redsn0w
2. Click on the button Extras
3. Click on Select IPSW, try the firmware file for your iOS device 6 downloaded in Step 2 and select it.
4. Now click on Just Boot
5. Connect your device to your computer and turn it off. Follow the instructions on screen and click the Next button to move to the next screen
6. Put the device in DFU mode again, as before:
a) Hold down the power button (Power) for at least 3 seconds
b) At the same time, hold down the Home button without leaving the ignition for at least 10 seconds
c) Release the power button, still holding down the Home button until Redsn0w does not recognize the device properly.
7. As soon as Redsn0w will recognize the device in DFU mode will launch the exploit limerain. If you start you will see the typical pineapple logo, then the procedure was successful.
In this way you will have your iOS device (from those listed) active jailbroken and ready to go!
Via | iPhoneHacks
No comments:
Post a Comment